$276.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Usually used on enclosed trailers built to almost maximum width, horse floats (axle spread around 33 Inches / 850mm) Part Number: TTSR 2.5 66 A : Width – 2.5 Inches / 64 mmLength – 66 Inches / 1674 mm Height – 17 Inches / 432...
$312.00
New round cold rolled fenders / guards Made from 11 gauge smooth aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 30mm Round Top: Fenders have a slight radius across the top Use: Drag car tubs, custom street, etc Part Number: DR 17.5 30 RTA : Width –17.5 Inches / 445 mmLength – 30 Inches / 762 mmHeight – 16 Inches / 406 mmStretch Out – 48 Inches / 1219 mmGauge – 11 / 2.30 mm USGWeight – 4 Kg *Stretch out...
$720.00
Made from .090 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 50mm Round Top: Fenders have a slight radius across the top Peterbilt: Outer edges are rolled and swaged for strength This fender is sold per unit – replacement 379 Peterbilt fender Part Number: DR 17 60 PB A Left (See our other listing for right side) : Width –17 1/8 Inches / 434mmLength – 60 Inches / 1522mmHeight – 26.5 Inches / 672mmStretch Out – 86 Inches /...
$720.00
Made from .090 gauge aluminum Double Radius: When the fenders have a radius on both inner and outer edges of at least 50mm Round Top: Fenders have a slight radius across the top Peterbilt: Outer edges are rolled and swaged for strength This fender is sold per unit – replacement 379 Peterbilt fender Part Number: DR 17 60 PB A Right (See our other listing for left side) : Width –17 1/8 Inches / 434mmLength – 60 Inches / 1522mmHeight – 26.5 Inches / 672mmStretch Out – 86 Inches /...
$205.00
New round cold rolled fenders / guards Made from 11 gauge aluminum Flat Top: Fenders are flat across the top Single Radius: When the fender has a rolled edge on the outside of at least 30mm and a flat lip of 20mm on the inside Use: Usually used on enclosed trailers built to almost maximum width, horse floats (axle spread around 33 Inches / 850mm) Part Number: TTSR 1.25 66 A : Width – 1.25 Inches / 32 mmLength – 66 Inches / 1676 mm Height – 17 Inches / 432...